Re: 93 ZJ AC - drier receiver
 

Curtis did pass the time by typing:
> Where is the drier receiver located - and - it is hard to replace?
> Apparently it's leaking. My shop manual doesn't seem to call it out.

The accumulator is under a recall from Jeep. Check to see if your
unit is still covered.

http://revbeergoggles.com/Fixes/sens...essure-low.jpg
Against the passenger fender well.

--
DougW

Re: 93 ZJ AC - drier receiver
 

Curtis did pass the time by typing:
> Where is the drier receiver located - and - it is hard to replace?
> Apparently it's leaking. My shop manual doesn't seem to call it out.

The accumulator is under a recall from Jeep. Check to see if your
unit is still covered.

http://revbeergoggles.com/Fixes/sens...essure-low.jpg
Against the passenger fender well.

--
DougW

Re: 93 ZJ AC - drier receiver
 

Curtis did pass the time by typing:
> Where is the drier receiver located - and - it is hard to replace?
> Apparently it's leaking. My shop manual doesn't seem to call it out.

The accumulator is under a recall from Jeep. Check to see if your
unit is still covered.

http://revbeergoggles.com/Fixes/sens...essure-low.jpg
Against the passenger fender well.

--
DougW

Re: 93 ZJ AC - drier receiver
 

Hey thanks - I've been checking out your sway bar bushing improvements
as well....

Re: 93 ZJ AC - drier receiver
 

Hey thanks - I've been checking out your sway bar bushing improvements
as well....

Re: 93 ZJ AC - drier receiver
 

Hey thanks - I've been checking out your sway bar bushing improvements
as well....

Re: 93 ZJ AC - drier receiver
 

Curtis did pass the time by typing:
> Hey thanks - I've been checking out your sway bar bushing improvements
> as well....

I'm amazed how much that helped. Problem is they don't last for ever.

If you have the V8 you have a larger front bar. Make sure you get the
correct part number.

Next time around I'm going to get some greasable ones (or drill the ones
I have for zerks) They squeek too damn much in the winter. :)

--
DougW

Re: 93 ZJ AC - drier receiver
 

Curtis did pass the time by typing:
> Hey thanks - I've been checking out your sway bar bushing improvements
> as well....

I'm amazed how much that helped. Problem is they don't last for ever.

If you have the V8 you have a larger front bar. Make sure you get the
correct part number.

Next time around I'm going to get some greasable ones (or drill the ones
I have for zerks) They squeek too damn much in the winter. :)

--
DougW

Re: 93 ZJ AC - drier receiver
 

Curtis did pass the time by typing:
> Hey thanks - I've been checking out your sway bar bushing improvements
> as well....

I'm amazed how much that helped. Problem is they don't last for ever.

If you have the V8 you have a larger front bar. Make sure you get the
correct part number.

Next time around I'm going to get some greasable ones (or drill the ones
I have for zerks) They squeek too damn much in the winter. :)

--
DougW

Re: 93 ZJ AC - drier receiver
 

While the system is discharged is a good time to replace all the O-rings. I
have had people call this silly, because it adds to the labor charge, but it
can add years to the time that the system stays charged. Once you replace
the O-rings and the accumulator, about the only thing that is likely to go
wrong, leak-wise, are the compressor seals. It would be a shame to take the
vehicle in for service at the start of next year's AC season, over an O-ring
gone bad.

Earle

"Curtis" <cchandler63@gmail.com> wrote in message
news:1147729376.182096.8300@u72g2000cwu.googlegrou ps.com...
> Hey thanks - I've been checking out your sway bar bushing improvements
> as well....
>