258 rebuild, exhaust manifold
 

rebuilt a 258 and went to put on the manifolds and the exhaust manifold
holes do not line up. Appears that the manifold has warped, any tricks to
getting this back on short of buying a new one, $600 from dealer?
--

O, it is excellent to have a giant's strength; but it is tyrannous to use it
like a giant.

Re: 258 rebuild, exhaust manifold
 

I'm a little confused now. When I removed the manifolds from the head, they
were two separate pieces.


OF, it is excellent to have a giant's strength; but it is tyrannous to use
it like a giant.

"Mike Romain" <romainm@sympatico.ca> wrote in message
news:3F350542.EE4F65C4@sympatico.ca...
> Did you disconnect it from the intake manifold first?
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> happy jeeper wrote:
> >
> > rebuilt a 258 and went to put on the manifolds and the exhaust manifold
> > holes do not line up. Appears that the manifold has warped, any tricks
to
> > getting this back on short of buying a new one, $600 from dealer?
> > --
> >
> > O, it is excellent to have a giant's strength; but it is tyrannous to
use it
> > like a giant.

Re: 258 rebuild, exhaust manifold
 

You have an older one then?

The later models have the intake and the exhaust bolted together.

If you go to any engine rebuilder, they have this big belt sander thing
that they can run the manifold across to make it flat again. If it has
warped beyond that, then you might be looking at replacing it.

Mike


happy jeeper wrote:
>
> I'm a little confused now. When I removed the manifolds from the head, they
> were two separate pieces.
>
> OF, it is excellent to have a giant's strength; but it is tyrannous to use
> it like a giant.
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:3F350542.EE4F65C4@sympatico.ca...
> > Did you disconnect it from the intake manifold first?
> >
> > Mike
> > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> > 88 Cherokee 235 BFG AT's
> >
> > happy jeeper wrote:
> > >
> > > rebuilt a 258 and went to put on the manifolds and the exhaust manifold
> > > holes do not line up. Appears that the manifold has warped, any tricks
> to
> > > getting this back on short of buying a new one, $600 from dealer?
> > > --
> > >
> > > O, it is excellent to have a giant's strength; but it is tyrannous to
> use it
> > > like a giant.

Re: 258 rebuild, exhaust manifold
 

I don't have my Chilton's in front of me, but I seem to recall that it
warns that the manifolds should be loosely attached before torquing down
the head. Might Happy Jeeper's problem have something to do with that?

Lee
`79 CJ-5
`89 Cherokee, minus most of the paint


On or about Sat, 9 Aug 2003, Mike Romain of romainm@sympatico.ca wrote:

> Did you disconnect it from the intake manifold first?
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> happy jeeper wrote:
> >
> > rebuilt a 258 and went to put on the manifolds and the exhaust manifold
> > holes do not line up. Appears that the manifold has warped, any tricks to
> > getting this back on short of buying a new one, $600 from dealer?
> > --
> >
> > O, it is excellent to have a giant's strength; but it is tyrannous to use it
> > like a giant.
>

--
"Marking it OT, crossing your fingers when you hit "send," or wearing
the propeller beanie while posting does not actually negate that."

Deborah Stevenson demonstrates the proper use of the clue-by-four in AFU.

Re: 258 rebuild, exhaust manifold
 

"happy jeeper" <jeepr@onthemountain.com> wrote in message
news:qrZYa.7838$pq5.1125556@news20.bellglobal.com. ..
Appears that the manifold has warped, any tricks to
> getting this back on short of buying a new one, $600 from dealer?

Less then $200 at 4WD.com

Re: 258 rebuild, exhaust manifold
 

thanks boys found one at 1aautomotive.com, $119
and thank for the offer jim but i'm in Canada

--
MATT

O, it is excellent to have a giant's strength; but it is tyrannous to use it
like a giant.

"Retiredff" <lbatter@bogfeet.net> wrote in message
news:sOJ_a.264$f15.33834@newsread1.prod.itd.earthl ink.net...
>
> "happy jeeper" <jeepr@onthemountain.com> wrote in message
> news:qrZYa.7838$pq5.1125556@news20.bellglobal.com. ..
> Appears that the manifold has warped, any tricks to
> > getting this back on short of buying a new one, $600 from dealer?
>
> Less then $200 at 4WD.com
>
>