Re: 2003 Liberty Right Rear Brake Light
 

If the bulb works in another position, and a bulb that works in another
position does not work here, then the trouble has to be 1.) voltage to the
position, 2.) the ground at the position. The problem could be the contact
plate at the bottom ot the socket, this is spring loaded, and could be stuck
down so it fails to make contact with the bulb.





"vlinelawn" <vlinelawn@aol.com> wrote in message
news:c2330a796d022dccfa68307f1b763f64@localhost.ta lkaboutautos.com...
> Right rear brake light out. Changed bulb, but bulb is also for reverse
> and
> than functions properly. Pulled fluke and test light out. I have 12 v dc
> at the pin for the brake light and I have a good ground so this is really
> stumping me. Any help will be greatly appreciated.
>

Re: 2003 Liberty Right Rear Brake Light
 

If the bulb works in another position, and a bulb that works in another
position does not work here, then the trouble has to be 1.) voltage to the
position, 2.) the ground at the position. The problem could be the contact
plate at the bottom ot the socket, this is spring loaded, and could be stuck
down so it fails to make contact with the bulb.





"vlinelawn" <vlinelawn@aol.com> wrote in message
news:c2330a796d022dccfa68307f1b763f64@localhost.ta lkaboutautos.com...
> Right rear brake light out. Changed bulb, but bulb is also for reverse
> and
> than functions properly. Pulled fluke and test light out. I have 12 v dc
> at the pin for the brake light and I have a good ground so this is really
> stumping me. Any help will be greatly appreciated.
>

Re: 2003 Liberty Right Rear Brake Light
 

If the bulb works in another position, and a bulb that works in another
position does not work here, then the trouble has to be 1.) voltage to the
position, 2.) the ground at the position. The problem could be the contact
plate at the bottom ot the socket, this is spring loaded, and could be stuck
down so it fails to make contact with the bulb.





"vlinelawn" <vlinelawn@aol.com> wrote in message
news:c2330a796d022dccfa68307f1b763f64@localhost.ta lkaboutautos.com...
> Right rear brake light out. Changed bulb, but bulb is also for reverse
> and
> than functions properly. Pulled fluke and test light out. I have 12 v dc
> at the pin for the brake light and I have a good ground so this is really
> stumping me. Any help will be greatly appreciated.
>