2000 XJ Front Staybar Bushings/Steering Stabilizer
 

I am looking to replace the front swaybar bushings on my wife's 2000 XJ
Classic. I see different part numbers listed in Quadratec (23mm, 25mm,
28mm, etc.). What is the difference between the different mm sizes. I know
there are different colors too.

In addition, the steering stabilizer is leaking. Is there a Rancho bolt on
replacement for the XJ. I found what looks like the OEM part at quadratec
but nothing else. I have the Rancho on my 97 TJ and it has held up pretty
good. The OEM didn't last very long on either vehicle.

I might just be retarded and can't find it though.

Thanks
GP-TJ
97 TJ
00 XJ

Re: 2000 XJ Front Staybar Bushings/Steering Stabilizer
 

One inch equals 25.4 millimeter. ;-) Probably the difference is
whether you have the trailer package or not. If you don't have a caliber
to mic it use something to transfer the diameter like a crescent wrench.
http://www.4wd.com/shopcherokee/Prod...ethaneBushings
Definitely replace the steering stabilizer:
http://www.jcwhitney.com/webapp/wcs/...&storeId=10101
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

GP-TJ wrote:
>
> I am looking to replace the front swaybar bushings on my wife's 2000 XJ
> Classic. I see different part numbers listed in Quadratec (23mm, 25mm,
> 28mm, etc.). What is the difference between the different mm sizes. I know
> there are different colors too.
>
> In addition, the steering stabilizer is leaking. Is there a Rancho bolt on
> replacement for the XJ. I found what looks like the OEM part at quadratec
> but nothing else. I have the Rancho on my 97 TJ and it has held up pretty
> good. The OEM didn't last very long on either vehicle.
>
> I might just be retarded and can't find it though.
>
> Thanks
> GP-TJ
> 97 TJ
> 00 XJ

Re: 2000 XJ Front Staybar Bushings/Steering Stabilizer
 

One inch equals 25.4 millimeter. ;-) Probably the difference is
whether you have the trailer package or not. If you don't have a caliber
to mic it use something to transfer the diameter like a crescent wrench.
http://www.4wd.com/shopcherokee/Prod...ethaneBushings
Definitely replace the steering stabilizer:
http://www.jcwhitney.com/webapp/wcs/...&storeId=10101
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

GP-TJ wrote:
>
> I am looking to replace the front swaybar bushings on my wife's 2000 XJ
> Classic. I see different part numbers listed in Quadratec (23mm, 25mm,
> 28mm, etc.). What is the difference between the different mm sizes. I know
> there are different colors too.
>
> In addition, the steering stabilizer is leaking. Is there a Rancho bolt on
> replacement for the XJ. I found what looks like the OEM part at quadratec
> but nothing else. I have the Rancho on my 97 TJ and it has held up pretty
> good. The OEM didn't last very long on either vehicle.
>
> I might just be retarded and can't find it though.
>
> Thanks
> GP-TJ
> 97 TJ
> 00 XJ

Re: 2000 XJ Front Staybar Bushings/Steering Stabilizer
 

One inch equals 25.4 millimeter. ;-) Probably the difference is
whether you have the trailer package or not. If you don't have a caliber
to mic it use something to transfer the diameter like a crescent wrench.
http://www.4wd.com/shopcherokee/Prod...ethaneBushings
Definitely replace the steering stabilizer:
http://www.jcwhitney.com/webapp/wcs/...&storeId=10101
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

GP-TJ wrote:
>
> I am looking to replace the front swaybar bushings on my wife's 2000 XJ
> Classic. I see different part numbers listed in Quadratec (23mm, 25mm,
> 28mm, etc.). What is the difference between the different mm sizes. I know
> there are different colors too.
>
> In addition, the steering stabilizer is leaking. Is there a Rancho bolt on
> replacement for the XJ. I found what looks like the OEM part at quadratec
> but nothing else. I have the Rancho on my 97 TJ and it has held up pretty
> good. The OEM didn't last very long on either vehicle.
>
> I might just be retarded and can't find it though.
>
> Thanks
> GP-TJ
> 97 TJ
> 00 XJ

Re: 2000 XJ Front Staybar Bushings/Steering Stabilizer
 

So the difference is the diameter of the swaybar itself? If that is right I
will have to measure it before I order.


"L.W. (ßill) ------ III" <----------@cox.net> wrote in message
news:40340EC5.AB745E7E@cox.net...
> One inch equals 25.4 millimeter. ;-) Probably the difference is
> whether you have the trailer package or not. If you don't have a caliber
> to mic it use something to transfer the diameter like a crescent wrench.
>
http://www.4wd.com/shopcherokee/Prod...ethaneBushings
> Definitely replace the steering stabilizer:
>
http://www.jcwhitney.com/webapp/wcs/...&storeId=10101
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> GP-TJ wrote:
> >
> > I am looking to replace the front swaybar bushings on my wife's 2000 XJ
> > Classic. I see different part numbers listed in Quadratec (23mm, 25mm,
> > 28mm, etc.). What is the difference between the different mm sizes. I
know
> > there are different colors too.
> >
> > In addition, the steering stabilizer is leaking. Is there a Rancho bolt
on
> > replacement for the XJ. I found what looks like the OEM part at
quadratec
> > but nothing else. I have the Rancho on my 97 TJ and it has held up
pretty
> > good. The OEM didn't last very long on either vehicle.
> >
> > I might just be retarded and can't find it though.
> >
> > Thanks
> > GP-TJ
> > 97 TJ
> > 00 XJ

Re: 2000 XJ Front Staybar Bushings/Steering Stabilizer
 

So the difference is the diameter of the swaybar itself? If that is right I
will have to measure it before I order.


"L.W. (ßill) ------ III" <----------@cox.net> wrote in message
news:40340EC5.AB745E7E@cox.net...
> One inch equals 25.4 millimeter. ;-) Probably the difference is
> whether you have the trailer package or not. If you don't have a caliber
> to mic it use something to transfer the diameter like a crescent wrench.
>
http://www.4wd.com/shopcherokee/Prod...ethaneBushings
> Definitely replace the steering stabilizer:
>
http://www.jcwhitney.com/webapp/wcs/...&storeId=10101
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> GP-TJ wrote:
> >
> > I am looking to replace the front swaybar bushings on my wife's 2000 XJ
> > Classic. I see different part numbers listed in Quadratec (23mm, 25mm,
> > 28mm, etc.). What is the difference between the different mm sizes. I
know
> > there are different colors too.
> >
> > In addition, the steering stabilizer is leaking. Is there a Rancho bolt
on
> > replacement for the XJ. I found what looks like the OEM part at
quadratec
> > but nothing else. I have the Rancho on my 97 TJ and it has held up
pretty
> > good. The OEM didn't last very long on either vehicle.
> >
> > I might just be retarded and can't find it though.
> >
> > Thanks
> > GP-TJ
> > 97 TJ
> > 00 XJ

Re: 2000 XJ Front Staybar Bushings/Steering Stabilizer
 

So the difference is the diameter of the swaybar itself? If that is right I
will have to measure it before I order.


"L.W. (ßill) ------ III" <----------@cox.net> wrote in message
news:40340EC5.AB745E7E@cox.net...
> One inch equals 25.4 millimeter. ;-) Probably the difference is
> whether you have the trailer package or not. If you don't have a caliber
> to mic it use something to transfer the diameter like a crescent wrench.
>
http://www.4wd.com/shopcherokee/Prod...ethaneBushings
> Definitely replace the steering stabilizer:
>
http://www.jcwhitney.com/webapp/wcs/...&storeId=10101
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> GP-TJ wrote:
> >
> > I am looking to replace the front swaybar bushings on my wife's 2000 XJ
> > Classic. I see different part numbers listed in Quadratec (23mm, 25mm,
> > 28mm, etc.). What is the difference between the different mm sizes. I
know
> > there are different colors too.
> >
> > In addition, the steering stabilizer is leaking. Is there a Rancho bolt
on
> > replacement for the XJ. I found what looks like the OEM part at
quadratec
> > but nothing else. I have the Rancho on my 97 TJ and it has held up
pretty
> > good. The OEM didn't last very long on either vehicle.
> >
> > I might just be retarded and can't find it though.
> >
> > Thanks
> > GP-TJ
> > 97 TJ
> > 00 XJ

Re: 2000 XJ Front Staybar Bushings/Steering Stabilizer
 

On Wed, 18 Feb 2004 19:51:34 -0500, "GP-TJ"
<gporter1970(goaway)@cox.net> wrote:

>I am looking to replace the front swaybar bushings on my wife's 2000 XJ
>Classic. I see different part numbers listed in Quadratec (23mm, 25mm,
>28mm, etc.). What is the difference between the different mm sizes. I know
>there are different colors too.
>
>In addition, the steering stabilizer is leaking. Is there a Rancho bolt on
>replacement for the XJ. I found what looks like the OEM part at quadratec
>but nothing else. I have the Rancho on my 97 TJ and it has held up pretty
>good. The OEM didn't last very long on either vehicle.

The Rancho steering stabilizer should be the same one used on your TJ.
If not, I know you can buy one as I have one on my '98 XJ... I bought
it from 4Wheel Parts and with installation it was about $60.


--
Taylor

'89 Audi 200
'03 Audi S6 Avant
'98 Jeep Cherokee Sport

Re: 2000 XJ Front Staybar Bushings/Steering Stabilizer
 

On Wed, 18 Feb 2004 19:51:34 -0500, "GP-TJ"
<gporter1970(goaway)@cox.net> wrote:

>I am looking to replace the front swaybar bushings on my wife's 2000 XJ
>Classic. I see different part numbers listed in Quadratec (23mm, 25mm,
>28mm, etc.). What is the difference between the different mm sizes. I know
>there are different colors too.
>
>In addition, the steering stabilizer is leaking. Is there a Rancho bolt on
>replacement for the XJ. I found what looks like the OEM part at quadratec
>but nothing else. I have the Rancho on my 97 TJ and it has held up pretty
>good. The OEM didn't last very long on either vehicle.

The Rancho steering stabilizer should be the same one used on your TJ.
If not, I know you can buy one as I have one on my '98 XJ... I bought
it from 4Wheel Parts and with installation it was about $60.


--
Taylor

'89 Audi 200
'03 Audi S6 Avant
'98 Jeep Cherokee Sport

Re: 2000 XJ Front Staybar Bushings/Steering Stabilizer
 

On Wed, 18 Feb 2004 19:51:34 -0500, "GP-TJ"
<gporter1970(goaway)@cox.net> wrote:

>I am looking to replace the front swaybar bushings on my wife's 2000 XJ
>Classic. I see different part numbers listed in Quadratec (23mm, 25mm,
>28mm, etc.). What is the difference between the different mm sizes. I know
>there are different colors too.
>
>In addition, the steering stabilizer is leaking. Is there a Rancho bolt on
>replacement for the XJ. I found what looks like the OEM part at quadratec
>but nothing else. I have the Rancho on my 97 TJ and it has held up pretty
>good. The OEM didn't last very long on either vehicle.

The Rancho steering stabilizer should be the same one used on your TJ.
If not, I know you can buy one as I have one on my '98 XJ... I bought
it from 4Wheel Parts and with installation it was about $60.


--
Taylor

'89 Audi 200
'03 Audi S6 Avant
'98 Jeep Cherokee Sport