1999 JCS Engine Misfires in Reverse
Cylinder #1 floods when it's put in reverse. Hesitates occasionally in
drive. ECM was replaced, same problem Any ideas? |
Re: 1999 JCS Engine Misfires in Reverse
What engine?
I would be looking for a harness that was too close to the exhaust or was really tight I think. When you put it in reverse, the engine moves which could cause a harness to hit the exhaust or be pulled on even, especially if you had a weak engine mount. Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's Canadian Off Road Trips Photos: Non members can still view! Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 (More Off Road album links at bottom of the view page) PhilsTV wrote: > > Cylinder #1 floods when it's put in reverse. Hesitates occasionally in > drive. > ECM was replaced, same problem > Any ideas? |
Re: 1999 JCS Engine Misfires in Reverse
What engine?
I would be looking for a harness that was too close to the exhaust or was really tight I think. When you put it in reverse, the engine moves which could cause a harness to hit the exhaust or be pulled on even, especially if you had a weak engine mount. Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's Canadian Off Road Trips Photos: Non members can still view! Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 (More Off Road album links at bottom of the view page) PhilsTV wrote: > > Cylinder #1 floods when it's put in reverse. Hesitates occasionally in > drive. > ECM was replaced, same problem > Any ideas? |
Re: 1999 JCS Engine Misfires in Reverse
What engine?
I would be looking for a harness that was too close to the exhaust or was really tight I think. When you put it in reverse, the engine moves which could cause a harness to hit the exhaust or be pulled on even, especially if you had a weak engine mount. Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's Canadian Off Road Trips Photos: Non members can still view! Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 (More Off Road album links at bottom of the view page) PhilsTV wrote: > > Cylinder #1 floods when it's put in reverse. Hesitates occasionally in > drive. > ECM was replaced, same problem > Any ideas? |
Re: 1999 JCS Engine Misfires in Reverse
Perhaps a leaking injector? You say it only leaks in reverse?
"PhilsTV" <philstv@yahoo.com> wrote in message news:03272a38e42d69fec6a4da6e981bea04@localhost.ta lkaboutautos.com... > Cylinder #1 floods when it's put in reverse. Hesitates occasionally in > drive. > ECM was replaced, same problem > Any ideas? > |
Re: 1999 JCS Engine Misfires in Reverse
Perhaps a leaking injector? You say it only leaks in reverse?
"PhilsTV" <philstv@yahoo.com> wrote in message news:03272a38e42d69fec6a4da6e981bea04@localhost.ta lkaboutautos.com... > Cylinder #1 floods when it's put in reverse. Hesitates occasionally in > drive. > ECM was replaced, same problem > Any ideas? > |
Re: 1999 JCS Engine Misfires in Reverse
Perhaps a leaking injector? You say it only leaks in reverse?
"PhilsTV" <philstv@yahoo.com> wrote in message news:03272a38e42d69fec6a4da6e981bea04@localhost.ta lkaboutautos.com... > Cylinder #1 floods when it's put in reverse. Hesitates occasionally in > drive. > ECM was replaced, same problem > Any ideas? > |
Re: 1999 JCS Engine Misfires in Reverse
"PhilsTV" <philstv@yahoo.com> wrote in message news:03272a38e42d69fec6a4da6e981bea04@localhost.ta lkaboutautos.com... > Cylinder #1 floods when it's put in reverse. Hesitates occasionally in > drive. > ECM was replaced, same problem > Any ideas? > The injectors have power applied all the time with the key on. The ECM controls the ground to the injectors. Follow the ground wire from the #1 injector back to the ECM. Wire should be White/ Dk Blue. Look for the wiring harness being pinched/chafed when vehicle is put into reverse. The ground wire is most likely being shorted to ground which causes the injector to stay open. |
Re: 1999 JCS Engine Misfires in Reverse
"PhilsTV" <philstv@yahoo.com> wrote in message news:03272a38e42d69fec6a4da6e981bea04@localhost.ta lkaboutautos.com... > Cylinder #1 floods when it's put in reverse. Hesitates occasionally in > drive. > ECM was replaced, same problem > Any ideas? > The injectors have power applied all the time with the key on. The ECM controls the ground to the injectors. Follow the ground wire from the #1 injector back to the ECM. Wire should be White/ Dk Blue. Look for the wiring harness being pinched/chafed when vehicle is put into reverse. The ground wire is most likely being shorted to ground which causes the injector to stay open. |
Re: 1999 JCS Engine Misfires in Reverse
"PhilsTV" <philstv@yahoo.com> wrote in message news:03272a38e42d69fec6a4da6e981bea04@localhost.ta lkaboutautos.com... > Cylinder #1 floods when it's put in reverse. Hesitates occasionally in > drive. > ECM was replaced, same problem > Any ideas? > The injectors have power applied all the time with the key on. The ECM controls the ground to the injectors. Follow the ground wire from the #1 injector back to the ECM. Wire should be White/ Dk Blue. Look for the wiring harness being pinched/chafed when vehicle is put into reverse. The ground wire is most likely being shorted to ground which causes the injector to stay open. |
All times are GMT -4. The time now is 04:35 PM. |
© 2024 MH Sub I, LLC dba Internet Brands