Jeeps Canada - Jeep Forums

Jeeps Canada - Jeep Forums (https://www.jeepscanada.com/)
-   Jeep Mailing List (https://www.jeepscanada.com/jeep-mailing-list-32/)
-   -   1990 wrangler 4 wheel drive vacuum line? (https://www.jeepscanada.com/jeep-mailing-list-32/1990-wrangler-4-wheel-drive-vacuum-line-40820/)

Jeremy 09-14-2006 02:30 PM

Re: 1990 wrangler 4 wheel drive vacuum line?
 
Yeah I got that much. The Jeep now wont fire it turns over fine. Also
it kinda sputters when I first turn the key on and or off.


Here are a few pics of my carb hopefully it works...

<a href="http://tinypic.com" target="_blank"><img
src="http://i10.tinypic.com/30tntwy.jpg" border="0" alt="Image and
video hosting by TinyPic"></a>


Jeremy 09-14-2006 02:34 PM

Re: 1990 wrangler 4 wheel drive vacuum line?
 
Yeah I got those hooked up. Just now it turns over but will not fire.


Jeremy 09-14-2006 02:34 PM

Re: 1990 wrangler 4 wheel drive vacuum line?
 
Yeah I got those hooked up. Just now it turns over but will not fire.


Jeremy 09-14-2006 02:34 PM

Re: 1990 wrangler 4 wheel drive vacuum line?
 
Yeah I got those hooked up. Just now it turns over but will not fire.


Mike Romain 09-14-2006 03:23 PM

Re: 1990 wrangler 4 wheel drive vacuum line?
 
Is it flooded out? They can flood bad enough to need the plugs aired
out.

Is the carb getting gas? If you look down the throat of the carb and
give the throttle a shot with your hand, you should see two streams of
gas squirting.

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)

Jeremy wrote:
>
> Yeah I got those hooked up. Just now it turns over but will not fire.


Mike Romain 09-14-2006 03:23 PM

Re: 1990 wrangler 4 wheel drive vacuum line?
 
Is it flooded out? They can flood bad enough to need the plugs aired
out.

Is the carb getting gas? If you look down the throat of the carb and
give the throttle a shot with your hand, you should see two streams of
gas squirting.

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)

Jeremy wrote:
>
> Yeah I got those hooked up. Just now it turns over but will not fire.


Mike Romain 09-14-2006 03:23 PM

Re: 1990 wrangler 4 wheel drive vacuum line?
 
Is it flooded out? They can flood bad enough to need the plugs aired
out.

Is the carb getting gas? If you look down the throat of the carb and
give the throttle a shot with your hand, you should see two streams of
gas squirting.

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)

Jeremy wrote:
>
> Yeah I got those hooked up. Just now it turns over but will not fire.


Jeremy 09-14-2006 03:24 PM

Re: 1990 wrangler 4 wheel drive vacuum line?
 
Its not flooded and it is getting gas. I'm thinking the distributor
line might be hooked up wrong. That or maybe my TAC vacuum line that
goes to the carb is in the wrong place. I'm trying anything and
everything at this point. It all looks good until I get to the carb. I
think I may have lines in the wrong places.


Jeremy 09-14-2006 03:24 PM

Re: 1990 wrangler 4 wheel drive vacuum line?
 
Its not flooded and it is getting gas. I'm thinking the distributor
line might be hooked up wrong. That or maybe my TAC vacuum line that
goes to the carb is in the wrong place. I'm trying anything and
everything at this point. It all looks good until I get to the carb. I
think I may have lines in the wrong places.


Jeremy 09-14-2006 03:24 PM

Re: 1990 wrangler 4 wheel drive vacuum line?
 
Its not flooded and it is getting gas. I'm thinking the distributor
line might be hooked up wrong. That or maybe my TAC vacuum line that
goes to the carb is in the wrong place. I'm trying anything and
everything at this point. It all looks good until I get to the carb. I
think I may have lines in the wrong places.



All times are GMT -4. The time now is 10:28 PM.


© 2024 MH Sub I, LLC dba Internet Brands

Page generated in 0.06489 seconds with 5 queries