1990 jeep cherokee no start
Hey guys,
I've got a very frustrating problem here. Customer brought in a 1990 Jeep cherokee limited, 4whldrv, automatic. We replaced the engine with one from a 1996. All the appropriate electronics were switched from the old engine to the new including, distributor, cap, rotor, coil, CPS, flywheel, intake and exhaust, all injectors (already on old intake). The problem is we now have a no start/no spark condition. This swamp is common at our shop, (newer 4.0L into older jeep) and always goes off without a hitch. This is the first time I've run into this. We've replaced the CPS, coil and ignition module check out O.K., Distributor checks out. We even put all the suspect parts into another jeep and they worked fine. The computer has also been replaced but to no avail. Any input would be appreciated. Thanks. Jesse |
Re: 1990 jeep cherokee no start
That leaves wires! Check all the grounds that are on the passenger side
bolted to the block. JoBo "spydey" <spydey98@gmail.com> wrote in message news:1146505102.768127.237490@y43g2000cwc.googlegr oups.com... > Hey guys, > > I've got a very frustrating problem here. Customer brought in a 1990 > Jeep cherokee limited, 4whldrv, automatic. We replaced the engine with > one from a 1996. All the appropriate electronics were switched from > the old engine to the new including, distributor, cap, rotor, coil, > CPS, flywheel, intake and exhaust, all injectors (already on old > intake). The problem is we now have a no start/no spark condition. > This swamp is common at our shop, (newer 4.0L into older jeep) and > always goes off without a hitch. This is the first time I've run into > this. We've replaced the CPS, coil and ignition module check out O.K., > Distributor checks out. We even put all the suspect parts into another > jeep and they worked fine. The computer has also been replaced but to > no avail. Any input would be appreciated. Thanks. > Jesse > |
Re: 1990 jeep cherokee no start
That leaves wires! Check all the grounds that are on the passenger side
bolted to the block. JoBo "spydey" <spydey98@gmail.com> wrote in message news:1146505102.768127.237490@y43g2000cwc.googlegr oups.com... > Hey guys, > > I've got a very frustrating problem here. Customer brought in a 1990 > Jeep cherokee limited, 4whldrv, automatic. We replaced the engine with > one from a 1996. All the appropriate electronics were switched from > the old engine to the new including, distributor, cap, rotor, coil, > CPS, flywheel, intake and exhaust, all injectors (already on old > intake). The problem is we now have a no start/no spark condition. > This swamp is common at our shop, (newer 4.0L into older jeep) and > always goes off without a hitch. This is the first time I've run into > this. We've replaced the CPS, coil and ignition module check out O.K., > Distributor checks out. We even put all the suspect parts into another > jeep and they worked fine. The computer has also been replaced but to > no avail. Any input would be appreciated. Thanks. > Jesse > |
Re: 1990 jeep cherokee no start
That leaves wires! Check all the grounds that are on the passenger side
bolted to the block. JoBo "spydey" <spydey98@gmail.com> wrote in message news:1146505102.768127.237490@y43g2000cwc.googlegr oups.com... > Hey guys, > > I've got a very frustrating problem here. Customer brought in a 1990 > Jeep cherokee limited, 4whldrv, automatic. We replaced the engine with > one from a 1996. All the appropriate electronics were switched from > the old engine to the new including, distributor, cap, rotor, coil, > CPS, flywheel, intake and exhaust, all injectors (already on old > intake). The problem is we now have a no start/no spark condition. > This swamp is common at our shop, (newer 4.0L into older jeep) and > always goes off without a hitch. This is the first time I've run into > this. We've replaced the CPS, coil and ignition module check out O.K., > Distributor checks out. We even put all the suspect parts into another > jeep and they worked fine. The computer has also been replaced but to > no avail. Any input would be appreciated. Thanks. > Jesse > |
Re: 1990 jeep cherokee no start
You'd think so wouldn't you. However, I did check all these and the
grounds are great. Turns over via starter with authority. |
Re: 1990 jeep cherokee no start
You'd think so wouldn't you. However, I did check all these and the
grounds are great. Turns over via starter with authority. |
Re: 1990 jeep cherokee no start
You'd think so wouldn't you. However, I did check all these and the
grounds are great. Turns over via starter with authority. |
Re: 1990 jeep cherokee no start
NEW INFO, fuel pump relay does not activate on cranking. When we
jumper the ballast resistor wires it chatters like crazy. |
Re: 1990 jeep cherokee no start
NEW INFO, fuel pump relay does not activate on cranking. When we
jumper the ballast resistor wires it chatters like crazy. |
Re: 1990 jeep cherokee no start
NEW INFO, fuel pump relay does not activate on cranking. When we
jumper the ballast resistor wires it chatters like crazy. |
All times are GMT -4. The time now is 01:27 AM. |
© 2024 MH Sub I, LLC dba Internet Brands