"Nathan W. Collier" <MontanaJeeper@aol.com> wrote in message
news:11ffggvjjb2ac94@corp.supernews.com...
> "Stephen Cowell" <scowell@sbcglobal.net> wrote in message
> news:TnJJe.109$SR5.41@newssvr22.news.prodigy.net.. .
> > Why must there be liberal seminars? Why must I have
> > attended them?
>
> lol, burns that youre busted huh? :-)

No... I might even attend one, if you
could point one out to me. Any idea
where I could find one?

> >> lol you really are a stupid ----. i asked you for a credible source,
you
> >> provide me with links containing "proudliberal" in the domain and then
> >> you
> >> defend it, claiming its a valid source of unbiased information.
> >
> > Spin some more... dizzy is a good look
> > for you.
>
> TRANSLATION --> "youre right, nate"

See? Completely dizzy.

> > The engineers
> > that wrote your leak detector manual believe
> > in atmospheric science
>
> the engineers who wrote the manual clearly stated to check below the
> suspected leak because refrigerant _falls_. :-)

Limitations! You don't have a clue! Own them!

> > Tell me again about how the sun degrades chlorine!
>
> the links i quoted make it clear. prove it doesnt.

Chlorine is an element... the only way to degrade
it would be to split its nucleus... that's pretty hard
to do. Or you might add some nucleons... otherwise,
it will stubbornly continue being chlorine, no matter
what you do to it.

> > Don't forget to add the part about how mixing something
> > makes it heavier... also add the part about how a compound
> > and a mixture are the same thing.
>
> LIAR! i never said they were the same thing. i elaborated a little to
help
> clear it up for your stupid *** using "mixture" generically. grasp boy,
> grasp....it looks good on you. :-)

I'm flattered! Such a quick study... for a
spinning welcher. Next time you copy me,
try to inject some brains into the discourse.
Borrow some, is what I'm saying.
__
Steve
..

 

"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:42F7E3CE.55D467CA@***.net...
> Stephen Cowell wrote:
> >
> > Let's look at what I posted:
> > <>
> > For the less-than-half full case:
> > Half he area of the circular face minus the quantity
> > twice the area of the triangle plus twice the area
> > of the pie wedge
> >
> > For the more-than-half-full case:
> > Half the area of the circular face, plus twice the area of
> > the triangle, plus twice the area of the pie wedge.
> >
> > Then times the length. Easy, wasn't it?
> > </>
> >
> > I mentioned the liquid level earlier... really the most
> > trivial part of the equation, we know we're
> > starting with a stick reading, don't we? I was most
> > interested in hearing whether you understood
> > the decomposition of the equation.
> >
> > When you mentioned 'logarithms' the answer was complete:
> > you haven't a clue.
> >
> > Bill, just because you can't read with comprehension
> > doesn't mean that my analysis was wrong. And if you
> > can find *anywhere* in your posted equation using
> > logs, I'll eat my hat.
> >
> > And once again, I have to blow your little expectations
> > away... didn't you get the hint when I said 'stick the
> > tanks, read the pumps'? How many times do you
> > think *I've* done that?
> >
> > I've worked at many service stations, I'm an
> > expert tire installer/repairman, I can do truck tires
> > as well as fuel/service/wash trucks. My first job
> > was at a Conoco in Lubbock... remember the five-
> > position mixer pumps? We had those... don't
> > remember the old man's name, but he had a class
> > act... only used SprayWay and blue towels on the
> > windshields. Busted my first tire on his manual
> > tire machine, really just a post bolted to the concrete
> > with a spin-down cone and a slip-on bead breaker.
> > Worked at a BF Goodrich tire dealer for a year...
> > I can run a Coats 4040a in my sleep. Hunter balancer.
> > Worked at a Gulf station in Austin for a year (my
> > parents were Gulf/Chevron jobbers). Worked for a year
> > at the Texaco truck stop, 183 and IH35... that's
> > where I learned truck tires and ran a service truck.
> > I'm leaving out some more SS jobs...
> > My last SS attendant job was at the Exxon in
> > Alpine, TX... just out of college, 1998. Did oil
> > change, lube, car wash... washing cars is good
> > exercise! Customer relations is perhaps the
> > most important part of the front/fueling operation...
> > skills that have served me well in later life.
> > __
> > Steve
> > "i recognize my limitations and
> > immediately own it (sic)."... Nate
> > .
> You're out of your rabbit a** mind! What does a area of a pie wedge
> have to with calculating the volume of a storage tank usually measured
> via the dip stick???????????

See? No grasp of induction... can't even draw
a picture. You don't have any clue about how
to break down the calculation, even though you
cut-and-pasted some google explanation of it.
Did you not read the explanation, or did you
just not understand it? What I really mean is,
are you just lazy, or stupid? Recall that you
posted:

<>
Now consider the area outside of the segment. That is, we want
the area of a portion of the circle. If we measure z in degrees we
want the portion of the circle that takes up 360 - 2z degrees of the
circle. So, the fraction we are dealing with here is:
</>

If you drew the picture, you'd see the pie wedge...
two of them, actually. Comprende?

>Which is the variable!

Is that a statement, or a question? I can't
make sense of it either way, anyway...

> Why do you think the
> sin of the arc was needed???????????

For the logarithm of the square of the mare?

> Remember why we used sin, cosine
> and tangent?
> 360 - 2(90 - arcsin [(r-h)/r])
> ------------------------------- (Pi)r^2 + (r-h)Sqrt (2rh - h^2)
> 360

All I read is arcsin, Bill... btw, do you have any
clue what the difference is? Could you possibly
explain to me why anyone would need to use an
arcsin function?

I noticed that you dropped the subject of:
> Geez, you couldn't even get a job at a gas station!
Busted your huevos thoroughly on that one!
__
Steve
"i recognize my limitations and
immediately own it (sic)."... Nate
..

 

"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:42F7E3CE.55D467CA@***.net...
> Stephen Cowell wrote:
> >
> > Let's look at what I posted:
> > <>
> > For the less-than-half full case:
> > Half he area of the circular face minus the quantity
> > twice the area of the triangle plus twice the area
> > of the pie wedge
> >
> > For the more-than-half-full case:
> > Half the area of the circular face, plus twice the area of
> > the triangle, plus twice the area of the pie wedge.
> >
> > Then times the length. Easy, wasn't it?
> > </>
> >
> > I mentioned the liquid level earlier... really the most
> > trivial part of the equation, we know we're
> > starting with a stick reading, don't we? I was most
> > interested in hearing whether you understood
> > the decomposition of the equation.
> >
> > When you mentioned 'logarithms' the answer was complete:
> > you haven't a clue.
> >
> > Bill, just because you can't read with comprehension
> > doesn't mean that my analysis was wrong. And if you
> > can find *anywhere* in your posted equation using
> > logs, I'll eat my hat.
> >
> > And once again, I have to blow your little expectations
> > away... didn't you get the hint when I said 'stick the
> > tanks, read the pumps'? How many times do you
> > think *I've* done that?
> >
> > I've worked at many service stations, I'm an
> > expert tire installer/repairman, I can do truck tires
> > as well as fuel/service/wash trucks. My first job
> > was at a Conoco in Lubbock... remember the five-
> > position mixer pumps? We had those... don't
> > remember the old man's name, but he had a class
> > act... only used SprayWay and blue towels on the
> > windshields. Busted my first tire on his manual
> > tire machine, really just a post bolted to the concrete
> > with a spin-down cone and a slip-on bead breaker.
> > Worked at a BF Goodrich tire dealer for a year...
> > I can run a Coats 4040a in my sleep. Hunter balancer.
> > Worked at a Gulf station in Austin for a year (my
> > parents were Gulf/Chevron jobbers). Worked for a year
> > at the Texaco truck stop, 183 and IH35... that's
> > where I learned truck tires and ran a service truck.
> > I'm leaving out some more SS jobs...
> > My last SS attendant job was at the Exxon in
> > Alpine, TX... just out of college, 1998. Did oil
> > change, lube, car wash... washing cars is good
> > exercise! Customer relations is perhaps the
> > most important part of the front/fueling operation...
> > skills that have served me well in later life.
> > __
> > Steve
> > "i recognize my limitations and
> > immediately own it (sic)."... Nate
> > .
> You're out of your rabbit a** mind! What does a area of a pie wedge
> have to with calculating the volume of a storage tank usually measured
> via the dip stick???????????

See? No grasp of induction... can't even draw
a picture. You don't have any clue about how
to break down the calculation, even though you
cut-and-pasted some google explanation of it.
Did you not read the explanation, or did you
just not understand it? What I really mean is,
are you just lazy, or stupid? Recall that you
posted:

<>
Now consider the area outside of the segment. That is, we want
the area of a portion of the circle. If we measure z in degrees we
want the portion of the circle that takes up 360 - 2z degrees of the
circle. So, the fraction we are dealing with here is:
</>

If you drew the picture, you'd see the pie wedge...
two of them, actually. Comprende?

>Which is the variable!

Is that a statement, or a question? I can't
make sense of it either way, anyway...

> Why do you think the
> sin of the arc was needed???????????

For the logarithm of the square of the mare?

> Remember why we used sin, cosine
> and tangent?
> 360 - 2(90 - arcsin [(r-h)/r])
> ------------------------------- (Pi)r^2 + (r-h)Sqrt (2rh - h^2)
> 360

All I read is arcsin, Bill... btw, do you have any
clue what the difference is? Could you possibly
explain to me why anyone would need to use an
arcsin function?

I noticed that you dropped the subject of:
> Geez, you couldn't even get a job at a gas station!
Busted your huevos thoroughly on that one!
__
Steve
"i recognize my limitations and
immediately own it (sic)."... Nate
..

 

"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:42F7E3CE.55D467CA@***.net...
> Stephen Cowell wrote:
> >
> > Let's look at what I posted:
> > <>
> > For the less-than-half full case:
> > Half he area of the circular face minus the quantity
> > twice the area of the triangle plus twice the area
> > of the pie wedge
> >
> > For the more-than-half-full case:
> > Half the area of the circular face, plus twice the area of
> > the triangle, plus twice the area of the pie wedge.
> >
> > Then times the length. Easy, wasn't it?
> > </>
> >
> > I mentioned the liquid level earlier... really the most
> > trivial part of the equation, we know we're
> > starting with a stick reading, don't we? I was most
> > interested in hearing whether you understood
> > the decomposition of the equation.
> >
> > When you mentioned 'logarithms' the answer was complete:
> > you haven't a clue.
> >
> > Bill, just because you can't read with comprehension
> > doesn't mean that my analysis was wrong. And if you
> > can find *anywhere* in your posted equation using
> > logs, I'll eat my hat.
> >
> > And once again, I have to blow your little expectations
> > away... didn't you get the hint when I said 'stick the
> > tanks, read the pumps'? How many times do you
> > think *I've* done that?
> >
> > I've worked at many service stations, I'm an
> > expert tire installer/repairman, I can do truck tires
> > as well as fuel/service/wash trucks. My first job
> > was at a Conoco in Lubbock... remember the five-
> > position mixer pumps? We had those... don't
> > remember the old man's name, but he had a class
> > act... only used SprayWay and blue towels on the
> > windshields. Busted my first tire on his manual
> > tire machine, really just a post bolted to the concrete
> > with a spin-down cone and a slip-on bead breaker.
> > Worked at a BF Goodrich tire dealer for a year...
> > I can run a Coats 4040a in my sleep. Hunter balancer.
> > Worked at a Gulf station in Austin for a year (my
> > parents were Gulf/Chevron jobbers). Worked for a year
> > at the Texaco truck stop, 183 and IH35... that's
> > where I learned truck tires and ran a service truck.
> > I'm leaving out some more SS jobs...
> > My last SS attendant job was at the Exxon in
> > Alpine, TX... just out of college, 1998. Did oil
> > change, lube, car wash... washing cars is good
> > exercise! Customer relations is perhaps the
> > most important part of the front/fueling operation...
> > skills that have served me well in later life.
> > __
> > Steve
> > "i recognize my limitations and
> > immediately own it (sic)."... Nate
> > .
> You're out of your rabbit a** mind! What does a area of a pie wedge
> have to with calculating the volume of a storage tank usually measured
> via the dip stick???????????

See? No grasp of induction... can't even draw
a picture. You don't have any clue about how
to break down the calculation, even though you
cut-and-pasted some google explanation of it.
Did you not read the explanation, or did you
just not understand it? What I really mean is,
are you just lazy, or stupid? Recall that you
posted:

<>
Now consider the area outside of the segment. That is, we want
the area of a portion of the circle. If we measure z in degrees we
want the portion of the circle that takes up 360 - 2z degrees of the
circle. So, the fraction we are dealing with here is:
</>

If you drew the picture, you'd see the pie wedge...
two of them, actually. Comprende?

>Which is the variable!

Is that a statement, or a question? I can't
make sense of it either way, anyway...

> Why do you think the
> sin of the arc was needed???????????

For the logarithm of the square of the mare?

> Remember why we used sin, cosine
> and tangent?
> 360 - 2(90 - arcsin [(r-h)/r])
> ------------------------------- (Pi)r^2 + (r-h)Sqrt (2rh - h^2)
> 360

All I read is arcsin, Bill... btw, do you have any
clue what the difference is? Could you possibly
explain to me why anyone would need to use an
arcsin function?

I noticed that you dropped the subject of:
> Geez, you couldn't even get a job at a gas station!
Busted your huevos thoroughly on that one!
__
Steve
"i recognize my limitations and
immediately own it (sic)."... Nate
..

 

"L.W. (ßill) ------ III" <----------@***.net> wrote in message
news:42F7E3CE.55D467CA@***.net...
> Stephen Cowell wrote:
> >
> > Let's look at what I posted:
> > <>
> > For the less-than-half full case:
> > Half he area of the circular face minus the quantity
> > twice the area of the triangle plus twice the area
> > of the pie wedge
> >
> > For the more-than-half-full case:
> > Half the area of the circular face, plus twice the area of
> > the triangle, plus twice the area of the pie wedge.
> >
> > Then times the length. Easy, wasn't it?
> > </>
> >
> > I mentioned the liquid level earlier... really the most
> > trivial part of the equation, we know we're
> > starting with a stick reading, don't we? I was most
> > interested in hearing whether you understood
> > the decomposition of the equation.
> >
> > When you mentioned 'logarithms' the answer was complete:
> > you haven't a clue.
> >
> > Bill, just because you can't read with comprehension
> > doesn't mean that my analysis was wrong. And if you
> > can find *anywhere* in your posted equation using
> > logs, I'll eat my hat.
> >
> > And once again, I have to blow your little expectations
> > away... didn't you get the hint when I said 'stick the
> > tanks, read the pumps'? How many times do you
> > think *I've* done that?
> >
> > I've worked at many service stations, I'm an
> > expert tire installer/repairman, I can do truck tires
> > as well as fuel/service/wash trucks. My first job
> > was at a Conoco in Lubbock... remember the five-
> > position mixer pumps? We had those... don't
> > remember the old man's name, but he had a class
> > act... only used SprayWay and blue towels on the
> > windshields. Busted my first tire on his manual
> > tire machine, really just a post bolted to the concrete
> > with a spin-down cone and a slip-on bead breaker.
> > Worked at a BF Goodrich tire dealer for a year...
> > I can run a Coats 4040a in my sleep. Hunter balancer.
> > Worked at a Gulf station in Austin for a year (my
> > parents were Gulf/Chevron jobbers). Worked for a year
> > at the Texaco truck stop, 183 and IH35... that's
> > where I learned truck tires and ran a service truck.
> > I'm leaving out some more SS jobs...
> > My last SS attendant job was at the Exxon in
> > Alpine, TX... just out of college, 1998. Did oil
> > change, lube, car wash... washing cars is good
> > exercise! Customer relations is perhaps the
> > most important part of the front/fueling operation...
> > skills that have served me well in later life.
> > __
> > Steve
> > "i recognize my limitations and
> > immediately own it (sic)."... Nate
> > .
> You're out of your rabbit a** mind! What does a area of a pie wedge
> have to with calculating the volume of a storage tank usually measured
> via the dip stick???????????

See? No grasp of induction... can't even draw
a picture. You don't have any clue about how
to break down the calculation, even though you
cut-and-pasted some google explanation of it.
Did you not read the explanation, or did you
just not understand it? What I really mean is,
are you just lazy, or stupid? Recall that you
posted:

<>
Now consider the area outside of the segment. That is, we want
the area of a portion of the circle. If we measure z in degrees we
want the portion of the circle that takes up 360 - 2z degrees of the
circle. So, the fraction we are dealing with here is:
</>

If you drew the picture, you'd see the pie wedge...
two of them, actually. Comprende?

>Which is the variable!

Is that a statement, or a question? I can't
make sense of it either way, anyway...

> Why do you think the
> sin of the arc was needed???????????

For the logarithm of the square of the mare?

> Remember why we used sin, cosine
> and tangent?
> 360 - 2(90 - arcsin [(r-h)/r])
> ------------------------------- (Pi)r^2 + (r-h)Sqrt (2rh - h^2)
> 360

All I read is arcsin, Bill... btw, do you have any
clue what the difference is? Could you possibly
explain to me why anyone would need to use an
arcsin function?

I noticed that you dropped the subject of:
> Geez, you couldn't even get a job at a gas station!
Busted your huevos thoroughly on that one!
__
Steve
"i recognize my limitations and
immediately own it (sic)."... Nate
..

 

"Billy Ray" <Billy_Ray@SPAMfuse.net> wrote in message
news:92d09$42f7f15d$42a1cc8c$25145@FUSE.NET...
> Bill, To complicate things I think his original question was about a
> horizontal cylinder. He then made reference to sticking a fuel tank which
> generally is a horizontal cylinder with convex semi-hemispherical endcaps.

The ones I've seen have been right circular cylinders, in
repose. We can do the spherical endcaps as an exercise
later...

> Just which does he want the volume of?

You have a comprehension problem as well?
__
Steve
..

 

"Billy Ray" <Billy_Ray@SPAMfuse.net> wrote in message
news:92d09$42f7f15d$42a1cc8c$25145@FUSE.NET...
> Bill, To complicate things I think his original question was about a
> horizontal cylinder. He then made reference to sticking a fuel tank which
> generally is a horizontal cylinder with convex semi-hemispherical endcaps.

The ones I've seen have been right circular cylinders, in
repose. We can do the spherical endcaps as an exercise
later...

> Just which does he want the volume of?

You have a comprehension problem as well?
__
Steve
..

 

"Billy Ray" <Billy_Ray@SPAMfuse.net> wrote in message
news:92d09$42f7f15d$42a1cc8c$25145@FUSE.NET...
> Bill, To complicate things I think his original question was about a
> horizontal cylinder. He then made reference to sticking a fuel tank which
> generally is a horizontal cylinder with convex semi-hemispherical endcaps.

The ones I've seen have been right circular cylinders, in
repose. We can do the spherical endcaps as an exercise
later...

> Just which does he want the volume of?

You have a comprehension problem as well?
__
Steve
..

 

"Billy Ray" <Billy_Ray@SPAMfuse.net> wrote in message
news:92d09$42f7f15d$42a1cc8c$25145@FUSE.NET...
> Bill, To complicate things I think his original question was about a
> horizontal cylinder. He then made reference to sticking a fuel tank which
> generally is a horizontal cylinder with convex semi-hemispherical endcaps.

The ones I've seen have been right circular cylinders, in
repose. We can do the spherical endcaps as an exercise
later...

> Just which does he want the volume of?

You have a comprehension problem as well?
__
Steve
..

 

"Nathan W. Collier" <MontanaJeeper@aol.com> wrote in message
news:11ffver6uvo182e@corp.supernews.com...
> "Billy Ray" <Billy_Ray@SPAMfuse.net> wrote in message
> news:92d09$42f7f15d$42a1cc8c$25145@FUSE.NET...
> > Just which does he want the volume of?
>
> it changes depending upon what youve already proven wrong. :-)

The peanut gallery chimes in! What else would
you have to add to this erudite discussion, Nate?
__
Steve
..