Jeep Cherokee Forum XJ (Cherokee) owners discuss their vehicles. Manufactured from 1984 till 2001

2.8l xj axles and gears?

Thread Tools
 
Search this Thread
 
Old May 18, 2008 | 07:05 PM
  #1  
sbxj's Avatar
Thread Starter
Junior Member
 
Joined: May 2008
Posts: 2
From: calgary
Default 2.8l xj axles and gears?

hey guys i have a 86 2.8l 4x4 xj and i was just wondering wat axles came stock in these i know its different than regular 4l axles with the vaccum this doesnt have vaccum and looks different? is it still a dana 30 n 35 or something different and also what gears came with these?
__________________
Old May 31, 2008 | 06:40 PM
  #2  
Tagg666's Avatar
Junior Member
 
Joined: May 2008
Posts: 1
From: i live in peg city manitoba
Default Re: 2.8l xj axles and gears?

well up front you have a dana 30 but it might not be a high pinion you should check cause if its not when if you do lift you jeep you could have front drive shaft problems.. as for the rear usualy its a dana 35 but the had a couple of diffrent modles it could be a custom or a standard pull of the diff cover to see if it has clips if it has clips it's the weaker axle of the two its a dana 35c
both of these axles are great for moderate wheelin but soon as you syart adding weight to the xj you will start to have problems. i pretty shure this is correct .... it depends it could have 3.55, 3.73, 4.10 depending if it has a towing package or not ... the easyist way to tell is jack up one rear tire . mark the tire at the top and mark the yolk "on the diff side" rotate the tire twice (2) and count the times your yolk passes the mark on your diff this will give you a ruff idea what gear ratio you have .... i have a 91 w sport pakage towing package it has 3.55 gears and a factory locker...i have a dana 30 high pinion up front.. my drive shaft is ujoint at diff end and a cardane at the t case i hope this has helped you out
Old Jun 1, 2008 | 01:49 PM
  #3  
sbxj's Avatar
Thread Starter
Junior Member
 
Joined: May 2008
Posts: 2
From: calgary
Default Re: 2.8l xj axles and gears?

ok thanks maybe i should have been more specific i was wondering if there was anything out of the ordinary for gears in the 2.8 I know about the dana's and the gears it doesnt depend on the tow package its the motor 4l auto has 3.55 manual is the 3.73 and the 4cyl is 4.10 tow package is a different gear in the trans for towing somtimes in the 88 and 89's it gives you a dana 44! dont mean to sound like a ***** lol
Old Jul 3, 2008 | 11:22 PM
  #4  
Mr White's Avatar
Administrator
iTrader: (1)
 
Joined: Feb 2008
Posts: 1,600
From: Quebec
Default Re: 2.8l xj axles and gears?

A short sure fire way to find it out the easy way. Take the serial number of the vehicle and call your FRIENDLY chrysler dealer and tell him u want a build sheet for this vehicle. (its FREE) It will state everything that was originally build to this vehicle.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
HomeBrewer
Jeep Mailing List
6
Jan 3, 2005 10:30 PM
Eric
Jeep Mailing List
60
Jul 5, 2004 12:23 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -4. The time now is 09:26 AM.

Page generated in 0.81357 seconds with 7 queries