project part out. Builder pats, mos brand new!
 

Most of the parts are still brand new and in boxes. here’s the list.

Axles:
Front chevy 60, full artec hydro ram mount truss, Reid inner C’s, 513, locked, warn premium hubs, sniper fab mounts, complete brakes, all new bearings and seals.

Rear AAM 14 bolt, full artec truss and pinion guard, factory discs, 513, locked sniper fab mounts

Both axles are set up for double triangulated 4 links but the uppers are not welded in so they can be easily changed. Pretty much bolt in applications.
$3000 for the pair


ORI’s:
2-16”, 2-14” anodised blue ORIst’s, still in original boxes
sold


Evolution Machine Heim joints:
16 joints (8 LH-8 RH), evo joints with KORE 5/8” balls, and 1.25” shanks, TMR tube adapters and jamb nuts.
$2000

ATX front frame kit:
Removes the hump from the front of the frame
$150

TJ tub:
Black tub with roll cage still on it, great shape with the exception of the floor by the drain holes. The body mount threads are still good.
$500

2005 Hemi/matching tranny:
Hemi engine complete with complete matching transmission
$2500

PSC Full Hydro:
I have the full hydro kit with double ended ram,tie rods and joints, premade hoses and extra hose, reservoir, orbital valve and firewall mount for valve. Only thing missing is the pump.
$1000

Beard Seats w Harnesses:
2 beard suspension seats with 5 point harnesses, and seat sliders. Seats have about 10 trips on them by the PO.
sold

231/300 doubler:
Box4rocks doubler 231 attached to a 300. Total rebuild on the 300 plus, 4:1 gears, 32 spline HD rear and 32 spline HD front output.
$900 for the 300 and $400 for the doubler

$1200 for both.

Everything is located in Port Elgin, prices are best offer. I will add anything else I find along the way.