no 4 wheel drive
transfer case works but front wheels wont turn need help
|
Re: no 4 wheel drive
need more info man, what Jeep etc. If it is a vac disconnect axle then likely a bad vac line oe internal in the housing for it.
|
Re: no 4 wheel drive
or hubs not engaging???
|
Re: no 4 wheel drive
its 94 yj vac lines good hocked up at both ends thanks
|
Re: no 4 wheel drive
are the hubs turned on with vacuum only on 94 yj
|
Re: no 4 wheel drive
It does not engage the hubs, the vacuum operates a shift fork and collar on the passenger axle. Make sure it is getting vacuum. If you have vacuum but still no 4wd, then you have an issue with the disconnect. There is a 4x4 Posi-Lok kit, it will get rid of the vacuum disconnect and replace it with a new cable operated piece. Well worth the upgrade. Here is the web page 4x4 Posi-Lok Canada .
|
Re: no 4 wheel drive
if you are keeping that axle the Posi Lok is the best mod you can make to it. Did it in my XJ and had a locker up front, it was great because you could Lock the 4WD you can have 3 wheel drive or 4 wheel drive depending on the engagement of the Posi Lok
|
Re: no 4 wheel drive
If you can find a magazine called "4x4 Garage" the winter issue has an excellent write up on the options that you have with a vacuum disconnected D30. It will answer all your questions.
|
All times are GMT -4. The time now is 10:36 PM. |
© 2024 MH Sub I, LLC dba Internet Brands